Page 22 - FAST FEED MILL Brochure_metric 2022

RE S1
FFX4 XNMU-08
"Bone Shaped" Inserts Rd°
with 4 Cutting Edges for INSL
Fast Feed Milling
W1

Dimensions Tough 1 Hard Recommended Machining Data

IC882 IC830 IC808 IC810 ap fz
Designation INSL S1 RE W1 (mm) (mm/t)
FFX4 XNMU 080620HP 17.90 7.80 2.00 15.60 • • • 0.20-2.00 0.20-0.80
FFX4 XNMU 080620T 17.90 7.80 2.00 15.60 • • • 0.20-2.00 0.40-1.20
• For side plunging, the initial cutting feed is 0.1 mm/t • T-for steel, ferritic and martensitic stainless steel, cast iron and hardened steel • HP-for austenitic stainless steel and
high temperature alloys

HP T

Average Cutting Data for FFX4 Fast Feed Cutters Size 08
Workpiece material Cutting
ISO class ISCAR Typical representative D.O.C. speed Feed
DIN/ISO mat. Hardness AISI/SAE/ Insert Carbide ap vc fz
513 Description group* HB ASTM DIN W.-Nr. type grade (mm) (m/min) (mm/tooth) Coolant
IC808 150-180 0.40-1.20 Dry
Non-alloy steel 1-5 130-180 1020 1.0402
IC830 150-180 0.40-1.20 Dry/Wet
IC808 150-180 0.40-1.20 Dry/Wet
6-8 260-300 4340 1.6582
Low alloy steel IC830 120-180 0.40-1.10 Dry/Wet
P 9 HRC 3135 1.5710 T IC808 0.50-2.0 130-180 0.40-1.10 Dry
35-42** IC830 120-160 0.40-1.00 Dry/Wet
IC808 120-170 0.40-0.80 Dry
High alloy steel 10-11 200-220 H13 1.2344
IC830 100-150 0.40-0.90 Dry/Wet
Ferritic/martensitic IC808 110-160 0.40-0.80 Dry
stainless steel 12-13 200 420 1.4021 IC830 100-150 0.40-0.90 Dry/Wet
Austenitic IC830 70-130 0.20-0.80
M 14 200 304L 1.4306 HP IC808 0.50-2.0 100-160 0.20-0.80 Wet
stainless steel
IC882 80-140 0.20-0.80
K Gray cast iron 15-16 250 Class 40 0.6025 (GG25) T IC810 0.50-2.0 150-220 0.40-1.20 Dry
Nodular cast iron 17-18 200 Class 65-45-12 0.7050 (GGG50) IC810 120-200 0.40-1.20
IC882 40-60 0.20-0.70
31-32 220 330 1.4864 IC808 40-80 0.20-0.70
IC830 40-75 0.20-0.70
IC882 20-30 0.20-0.70
High temperature
S 33-35 340 Inconel 718 2.4668 HP IC808 0.50-2.0 25-40 0.20-0.70 Wet
alloys and Titanium
IC830 25-35 0.20-0.70
IC882 30-50 0.20-0.70
3.7165
36-37 30-32 AMS R56400 IC808 40-60 0.20-0.70
(Ti6AI4V ELI) IC830 35-55 0.20-0.70
H Hardened steel 38 HRC 45-49 HARDOX 450 plate T IC808 0.50-2.0 50-75 0.20-0.50 Dry
* ISCAR material group in accordance with VDI 3323 standard ** Quenched and tempered
For machining under unstable conditions, the recommended cutting data should be reduced by 20-30%

22 FAST FEED MILLING