THREADING
NPA 35/2021
Expanding the Range of Laydown Threading Inserts for Internal and External Applications
Highlights
ISCAR is expanding its range of laydown threading inserts for machining a wide range of materials.
Features
- Full and partial profiles for a Unified Thread Standard UN pitch of 64 up to 4 TPI.
- Full profiles for a Unified Thread Standard UNJ (ASME B1. 15) pitch of 36 up to 9 TPI.
- External55° partial profile, laydown threading inserts with a pitch of 48 up to 16 TPI.
- Full and partial profile threading ISO metric with a thread pitch of 0.5 mm up to 3.5 mm.
- Full and partial profiles for NPT (National Pipe Thread) standards intended for a pitch of
27 up to 8 TPI.
- Full profile threading insert NPS (American Standard Straight Pipe Thread)
used for mechanical joining and pipe fittings.
- Full profile laydown threading insert NPTF (National Pipe Threads - Dry Seal)
(ANSI/ASME B1.20.1-1976) for steam, gas and water pipes.
External Threading PG Insert for the Electrical Industry
- API - oil thread, round profile (API Spec 74-1994) laydown threading inserts.
- Full trapezoidal ACME threading inserts with a pitch of 16 up to 4 TPI.
- Full trapezoidal Stub Acme STACME threading inserts with a pitch of 16 up to 4 TPI.
- New fully ground profile inserts with higher accuracy and
better surface quality.
Available in IC908, IC228, IC250, IC1007 PVD Coated Grades and IC08 Uncoated Grade:
- Very good wear resistance.
- Hard substrate with excellent chipping resistance, combined with TiAlN PVD coating.
- Provides high wear and oxidation resistance.
- Good choice for non-ferrous materials and cast iron.
IC1007
- A hard submicron grain size substrate with TiAlN + TiN PVD coating.
- Features high plastic deformation resistance.
- Suitable for threading steel, stainless steel and hard steels with moderate to high
cutting speeds at stable conditions.
- A good choice for non-ferrous materials and cast iron.
IC228
TiN PVD coated grade on very tough substrate.
Recommended for threading steels and stainless steels at low to medium cutting speeds.
IC250
TiCN+TiN PVD coated grade on tough substrate.
Used for threading steels and alloy steels at low to medium cutting speeds.
IC08
An uncoated submicron carbide grade, used for steels, stainless steel and high-temperature alloys at low cutting speeds.
Good choice for non-ferrous materials as well.
ER/L-55°
External Laydown Threading Inserts with a 55° Partial Profile for General Industries
• For threading between walls use GRIP-type inserts TIP-WT, GEPI-WT, TIPI-WT
• New
(1) With pressed chipformer
(2) Threads per inch maximum
(3) Threads per inch minimum
ER/L-60°
External Laydown Threading Inserts with a 60° Partial Profile for General Industries
• For threading between walls use GRIP-type inserts SCIR/L B/F -MTR/L, TIP-MT, GEPI-MT, TIPI-MT.
• New
(1) With pressed chipformer
(2) Thread pitch minimum (mm)
(3) Thread pitch maximum (mm)
(4) Threads per inch maximum
(5) Threads per inch minimum
IR/L-60°
Internal Laydown Threading Inserts with a 60° Partial Profile for General Industry
• New
(1) With pressed chipformer
(2) Thread pitch minimum (mm)
(3) Thread pitch maximum (mm)
(4) Threads per inch maximum
(5) Threads per inch minimum
ER/L-ISO
External ISO Metric (DIN13 12-1986 class: 6g) Laydown
Threading Inserts for General Industry
• For threading between walls use GRIP-type inserts TIP-ISO class: 6g
(1) Multi-tooth
(2) With pressed chipformer
(3) Thread pitch
(4) Number of teeth per corner
• For threading between walls use GRIP-type inserts TIP-ISO class: 6g
• New
(1) Multi-tooth
(2) With pressed chipformer
(3) Thread pitch
(4) Number of teeth per corner
IR/L-ISO
Internal ISO Metric (DIN13 12-1986 class 6H) Laydown Threading Inserts for General Industry
• Tolerance: Class 6H.
(1) With pressed chipformer
(2) Multi-tooth
(3) Thread pitch
(4) Number of teeth per corner
• Tolerance: Class 6H.
• New
(1) With pressed chipformer
(2) Multi-tooth
(3) Thread pitch
(4) Number of teeth per corner
• Tolerance: Class 6H.
(1) With pressed chipformer
(2) Multi-tooth
(3) Thread pitch
(4) Number of teeth per corner
ER/L-UN
External American UN Full Profile (UN, UNC, UNF, UNEF)
Laydown Threading Inserts for General Industry
• Tolerance: Class 2A
• For threading between walls use GRIP-type insert TIP-UN
(1) With pressed chipformer
(2) Multi-tooth
(3) Threads per inch
(4) Number of teeth per corner
• Tolerance: Class 2A
• For threading between walls use GRIP-type insert TIP-UN
(1) With pressed chipformer
(2) Multi-tooth
(3) Threads per inch
(4) Number of teeth per corner
IR/L-UN
Internal American UN Full Profile (UN, UNC, UNF, UNEF)
Laydown Threading Inserts for General Industry
• Tolerance: class 2B,ANSI B1, 3M-1986.
• New
(1) With pressed chipformer
(2) Multi-tooth
(3) With pressed chipformer
(4) Threads per inch
(5) Number of teeth per corner
• Tolerance: class 2B,ANSI B1, 3M-1986.
• New
(1) With pressed chipformer
(2) Multi-tooth
(3) With pressed chipformer
(4) Threads per inch
(5) Number of teeth per corner
• Tolerance: class 2B,ANSI B1, 3M-1986.
• New
(1) With pressed chipformer
(2) Multi-tooth
(3) With pressed chipformer
(4) Threads per inch
(5) Number of teeth per corner
ER/L-NPT
External NPT (National Pipe Threads) Full Profile Laydown
Threading Inserts for Steam, Gas and Water Pipes
• For threading between walls use GRIP-type insert TIP-NPT.
• National Pipe Threads ANSI/ASME B1.20.1-1983
• New
(1) With pressed chipformer
(2) Multi-tooth
(3) Threads per inch
(4) Number of teeth per corner
IR/L-NPT
Internal NPT (National Pipe Threads) Full Profile Laydown Threading Inserts
for Steam, Gas and Water Pipes
• National Pipe Threads ANSI/ASME B1.20.1-1983.
• New
(1) With pressed chipformer
(2) Multi-tooth
(3) Threads per inch
(4) Number of teeth per corner
IR/L-NPTF
Internal NPTF (National Pipe Threads) Full Profile Laydown
Threading Inserts for Steam, Gas and Water Pipes
• (National Pipe Threads-Dry seal) ANSI/ASME B1.20.1-1976
• New
(1) Threads per inch
ER/L-BSPT
External BSPT (British Standard Pipe) B.S.21-1957
Full Profile Laydown Threading Inserts
• For threading between walls use insert TIP-BSPT
• New
(1) With pressed chipformer
(2) Threads per inch
IR/L-BSPT
Internal BSPT (British Standard Pipe) B.S.21-1957 Full Profile Laydown Threading Inserts
• New
(1) With pressed chipformer
(2) Threads per inch
ER/L-STACME
External STUB ACME Laydown Threading Inserts with a
Shallow ACME Profile for Control Valves
• STUB ACME ASME/ANSI B1.8-1988 Class 2G
• New
(1) Threads per inch
IR/L-STACME
Internal STUB ACME Laydown Threading Inserts with a Shallow ACME Profile for Control Valves
• Tolerance: Class 2G.
• New
(1) Threads per inch
ER/L-ACME
External ACME Profile Laydown Threading Inserts for Feed Screws
• ACME ASME/ANSI B1.5-1988 Class 3G
• New
(1) Threads per inch
IR/L-ACME
Internal ACME Profile Laydown Threading Inserts for Feed Screws
• ACME ASME/ANSI B1.5-1988 Class 3G
• New
(1) Threads per inch
ER/L-RND
External DIN405 Round Laydown Threading Inserts for
Fire Fighting and Food Industry Pipe Couplings
• Tolerance: Class 7H
• New
(1) With pressed chipformer
(2) Threads per inch
ER/L-UNJ
External UNJ Profile Laydown Threading Inserts for
the Aviation and Aerospace Industries
• UNJ MIL-S-8879C 9-1992 Class 3A
• Only right-hand inserts are available in grade IC806 and IC1007
• New
• Thread milling application available only for inserts size 06, 08, 11
(1) Threads per inch
IR/L-UNJ
Internal UNJ Profile Laydown Threading Inserts for
the Aviation and Aerospace Industries
• Thread milling application available only for inserts size 06, 08, 11
• New
(1) Threads per inch
ER/L-TR
External Trapeze Shaped DIN103 Laydown Threading Inserts for Feed Screws
• DIN 103 04/1977,1502901/1977 Class 7e
• New
(1) One cutting edge only
(2) Thread pitch
ER/L-ABUT
External American Buttress Laydown Threading Inserts for
High Force Transmission in One Direction
• ANSI B1.9-1973 Class 2
• New
(1) Threads per inch
IR/L-ABUT
Internal American Buttress Laydown Threading Inserts
for High Force Transmission in One Direction
• ANSI B1.9-1973 Class 2
• New
(1) Threads per inch
ER/L-API
External API - Oil Thread Profile Laydown Threading Inserts
• New
(1) V-0.040
(2) V-0.038R
(3) V-0.050
(4) Threads per inch
(5) Connection no. or size
IR/L-API
Internal API - Oil Thread Profile Laydown Threading Inserts
• 0.050, API Spec 74-1994
• New
(1) V-0.040
(2) V-0.038R
(3) V-0.050
(4) Threads per inch
(5) Connection no. or size
ER-PG
External Threading Inserts for the Electrical Industry
• New
(1) Threads per inch
ER/L-NPS
External NPS Full Profile Laydown Threading Inserts for Mechanical Joints and Pipe Fittings
• For threading between walls use GRIP-type insert TIP-NPT.
• National Pipe Threads ANSI/ASME B1.20.1-1983
• New
(1) Threads per inch
The NPA35-2021's pdf file:
View (PDF) or
Download (ZIP)