ISCAR Cutting Tools
 Slot Milling & Slitting Cutters
 
  Slot Cutters

ISCAR's slot milling cutters use cutting inserts with four cutting edges. They are suitable for high table feeds resulting in increased productivity. Slotting cutters are available in either an arbor or disk type, with a top, bottom or full slot configuration.
Diameter range:
80 to 250 mm (3.150 to 9.843").
Specials are available in a diameter range up to 450 mm (17.717").
Width range:
8 to 25 mm (.315 to .984").
Specials are available with a minimum width of 8 mm (.315").

Slitting Cutters

ISCAR's slitting cutters feature a prismatic, wedged clamping system that has changed the industry's standard.
Each cutting insert is manually positioned between the flexible jaws of a SELF-GRIP pocket - no screws or spare parts are required.
Each pocket has a stopper that limits the insertion of the carbide insert and flexible jaws that precisely and securely position each insert. Indexing is both easy and fast.
A simple lever extractor is used to remove the carbide insert and a plastic hammer aids in indexing. The entire indexing process is possible without removing the cutter from the machine.
This eliminates the need to re-position the cutter, resulting in minimal down-time.
Diameter range:
50 - 350 mm (1.969 - 13.780")
Specials are available in a diameter range of 39 - 1470 mm
(1.535 - 57.874")
Width range:
1.4 - 6 mm (0.55 - .236")
Specials are available in a width range of 1.3 - 8 mm (.051 - .315") 		 
 
SlitSlot